Caractéristiques LCT 441FLEX
Spécifications :
. Condenser, externally polarized
. Acoustical operating principle : Pressure gradient transducer
. Diaphragm : 3 micron gold sputtered Mylar
. Transducer Ø : 25.4 mm, 1 in
. Polar pattern : Omni, wide cardioid, cardioid, supercardioid, figure-8, reverse cardioid, reverse wide cardioid, reverse supercardioid
. Sensitivity : 17.2 mV/Pa, -35.3 dBV/Pa
. Equivalent noise level : 7 dB (A), cardioid
. Max. SPL for 0.5 % THD : 144 dBSPL
. Signal / noise ratio : 87 dB (A)
. Dynamic range : 137 dB (A)
. Supply voltage : 48 V ± 4 V
. Current consumption : 4 mA
. Internal impedance : 54 Ω
. Rated load impedance : 1000 Ω
. Connector : Gold plated 3-pin XLR
. Mic enclosure : Zinc die cast
. Microphone dimensions : 138 x 52 x 36 mm, 5.43 x 2.04 x 1.42 in
. Microphone net weight : 325 g